Locking Bush 110 Series CL1

Self Centering – 110 series
This Locking Bush consists of two conical pieces and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones; so, CL 1 is suitable for the applications where small hubs are used. It is recommended for medium to high torques and is self centering. CL1 guarantees a very precise axial positioning, as no axial displacement of hub occurs during the assembly operation. Available for shaft diameters from 6 to 130mm.

slider9
cl1_12
Name Part No I.D. O.D. L L1 B D Torque Nm Axial Force N Enquire
CL24x34 CL24x34T 24 34 25 45 51 56 270 22000
CL25x34 CL25x34T 25 34 25 45 51 56 280 22000
CL30x41 CL30X41T 30 41 25 45 51 62 510 33000
CL35x47 CL35x47 35 47 32 52 58 69 790 45000
CL40x53T CL40x53T 40 53 32 52 58 75 900 45000
CL45x59 CL45x59 45 59 45 70 78 86 1890 84000
CL50x65T CL50x65T 50 65 45 70 78 92 2100 84000
CL60x77T CL60x77T 60 77 55 80 88 104 2840 94000
CL75x95 CL75x95 75 95 65 96 1006 126 5600 150000
CL80x100 CL80x100 80 100 65 96 106 131 8020 200000
CL90x112 CL90x112 90 112 65 96 106 144 9000 200000
CL100x125 CL100x125 100 125 65 96 106 154 15000 300000
CL110x140 CL110x140 110 140 90 128 140 180 16000 290000
CL120x155 CL120x155 120 155 90 128 140 198 17500 290000