Locking Bush 200 Series CL2

Non Self-Centering – 200 series
Cone clamping unit consists of four pieces with two inside double cone-rings joined through a set of tightening screws. It is recommended for medium to high torques and although it is not self-centering, it can be easily assembled and disassembled. Available for shaft diameters from 20 to 900mm.

Characteristics
Medium – high torque
Wide tolerances
Easy dismantling
Torque = Maximum transmittable torque when axial force is zero
Axial Force = Maximum axial force when transmittable torque is zero


cl1_12
Name Part No I.D. O.D. L L1 B D Torque Nm Axial Force N Enquire
CL24x50 CL24x50B 24 50 17 20 27.5 N/A 370 32000
CL25x50B CL25x50B 24 50 17 20 27.5 N/A 400 32000
CL30x55B CL30x55B 30 55 17 20 27.5 N/A 530 36000
CL35x60B CL35x60B 35 60 17 20 27.5 N/A 750 43000
CL38x65B CL38x65B 38 65 17 20 27.5 930 N/A 49000
CL40x65B CL40x65B 40 65 17 20 27.5 N/A 980 49000
CL24x75 CL42x75 42 75 20 24 33.5 N/A 1580 75000
CL45x75B CL45x75B 45 75 20 24 33.5 N/A 1700 76000
CL48x80B CL48x80B 48 80 20 24 33.5 N/A 1790 74000
CL50x80B CL5x80B 50 80 20 24 33.5 N/A 1870 75000
CL55x85 CL55x85 55 85 20 24 33.5 N/A 2390 88000
CL60x90B CL60x90B 60 90 20 24 33.5 N/A 2610 88000
CL65x95B CL65x95B 65 95 20 24 33.5 N/A 3210 98000
CL70x110B CL70x110B 70 110 24 28 39.5 N/A 4600 132000
CL75x115B CL75x115B 75 115 24 28 39.5 N/A 4900 131000
CL80x120B CL80x120B 80 120 24 28 39.5 N/A 5200 131000
CL85x125 CL85x125 85 125 24 28 39.5 N/A 6300 148000
CL90x130B CL90x130B 90 130 24 28 39.5 N/A 6600 147000
CL95x135 CL95x135 95 135 24 28 39.5 N/A 7900 167000
CL100x145B CL100x145B 100 145 26 33 47.0 N/A 9750 195000
CL120x165 CL120x165 120 165 26 33 47.0 N/A 13300 221000
CL140x190 CL140x190 140 190 34 38 52.0 N/A 21200 302000
CL150x200B CL150x200B 150 200 34 38 52.0 N/A 24500 329000
CL160x210 CL160x210 160 210 34 38 52.0 N/A 28400 355000
CL170x225 CL170x225 170 225 38 44 60.0 N/A 33600 396000