QD Bushes

Our QD bushes are used through the industry offering convenience and design flexibility. The taper-bored “QD” item easily fits over the tapered bush and tightening of the cap screws produces a tight fit to the shaft. The bush is easily removed from the hub by using the pull-up bolts as jack screws. All our QD bushes are available in pilot bore, and can be re-bored to suit the shaft requirements.

6-qd-bushes-and-hubs-1-copy
7-qd-bushes-and-hubs-copy
Name Max Bore Outside Dia Total Length A E B No. Bolts P.C.D Enquire
mm D L
SH Bush 35 68.3 31.9 9.7 21.1 47.3 3 57.2
SDS Bush 41 80.9 33.3 11.1 19.4 55.5 3 68.3
SD Bush 41 80.9 46.1 11.1 32.4 55.5 3 68.3
SF Bush 59 118.3 50.8 12.7 35.3 79.4 3 98.3
E Bush 73 152.3 66.5 19.4 47.2 96.8 3 127